RSS Feed

S2000 cluster

S2000 cluster
the color filter can be easily replaced with a different colorthe color filter can be easily replaced with a different color
the color filter can be easily replaced with a different color
Here the color filter is removed. You can see the bulbs in the background. I'm planning on replacing them with bright white leds.Here the color filter is removed. You can see the bulbs in the background. I’m planning on replacing them with bright white leds.
Here the color filter is removed. You can see the bulbs in the background. I’m planning on replacing them with bright white leds.
this is what the S2000 cluster will look like in the westfield (miata) housing.this is what the S2000 cluster will look like in the westfield (miata) housing.
this is what the S2000 cluster will look like in the westfield (miata) housing.
miata cluster in westfield dashboardmiata cluster in westfield dashboard
miata cluster in westfield dashboard
miata cluster in westfield dashboardmiata cluster in westfield dashboard
miata cluster in westfield dashboard
S2000 cluster with cutouts for the miata connectors (bottom).I cut these out of the miata cluster.S2000 cluster with cutouts for the miata connectors (bottom).I cut these out of the miata cluster.
S2000 cluster with cutouts for the miata connectors (bottom).I cut these out of the miata cluster.
Miata connectors glued in and circuit ready to be soldered.It looks messy, but everything is pretty firmly glued in.Miata connectors glued in and circuit ready to be soldered.It looks messy, but everything is pretty firmly glued in.
Miata connectors glued in and circuit ready to be soldered.It looks messy, but everything is pretty firmly glued in.
Honda connectors removed and wires soldered in. I always use the oem Mazda color codes (an old wiring loom is super handy for this kind of thing) as it's easier to spot mistakes.Honda connectors removed and wires soldered in. I always use the oem Mazda color codes (an old wiring loom is super handy for this kind of thing) as it’s easier to spot mistakes.
Honda connectors removed and wires soldered in. I always use the oem Mazda color codes (an old wiring loom is super handy for this kind of thing) as it’s easier to spot mistakes.
I kinda made a mess of the dining table :)I kinda made a mess of the dining table :)
I kinda made a mess of the dining table :)
Modifry ECT module glued to the MS3X moduleModifry ECT module glued to the MS3X module
Modifry ECT module glued to the MS3X module
Fits like a glove. I still need to add a connector for the programming cable. Will probably use a 3.5 phone jack or so.Fits like a glove. I still need to add a connector for the programming cable. Will probably use a 3.5 phone jack or so.
Fits like a glove. I still need to add a connector for the programming cable. Will probably use a 3.5 phone jack or so.
MX5 circuit board installed with some stick on spacers to prevent it touching the S2000 pcb.MX5 circuit board installed with some stick on spacers to prevent it touching the S2000 pcb.
MX5 circuit board installed with some stick on spacers to prevent it touching the S2000 pcb.
41.5Hz @ 50km/u = ±4800ppm41.5Hz @ 50km/u = ±4800ppm
41.5Hz @ 50km/u = ±4800ppm
Very simple VR circuit.Very simple VR circuit.
Very simple VR circuit.

Reageren?

Nog geen reacties

Helaas, het reactieformulier is op dit moment gesloten.